Category: "The Artist's Studio"

And, after all, you're my Window Wall

by brae  

:D  Please forgive the artistic license.  While the Studio looked fine with its open front, in reality that should be an enclosed wall.  As noted in a previous post, I chose the mockup with the tall upper panes.

Mike helped me hammer out some details since he's great with components and construction.  I told him I planned to use wood I-beams, strip wood and clear acrylic for the vertical portion, but the top and bottom enclosing parts were confounding me.  He suggested using the same I-beams on top and bottom, having the beams butt together while having the interior wood extend into the top and bottom.  His idea helped it all click for me.  Yes, it will all make sense with the pictures.  :D

I bought the I-beams from Manchester Woodworks.  The strip wood came from the local hobby shops: Michaels, Hobby Lobby, Blick, etc.  The large acrylic sheet came from Hobby Lobby; it measures 2' x 4' and was $6 (before using a 40% off coupon).  It's not as thick as I might have wanted...but to buy a thicker sheet would have meant waiting for shipping...was not going to happen.

The plan was to insert 1/8" x 1/4" strip wood into the channel, then insert the acrylic pane, then insert 1/16" x 1/4" strip wood on the other side of the acrylic.

Why not make two strip wood grids and sandwich one large cut piece of acrylic inside?  Sagging.  I just didn't think it would be a straight, solid (sag-less) window using that method.  And, this window would be moved around to access the interior.  It needed to be sturdy enough for handling.

I determined the outer frame by taping the I-beams together.  Apparently, my artist's model passed out at the thought of the math ahead.  :O

This gave me the inner vertical beam measurement of 12" tall.  I don't want to bore you with the math, but here are the final measurements.  I keep these in my blog mainly for my own reference so I don't have to write them down.  I can just search the backlog.  :D

The interior wood trim needed to extend 1/8" past both the top and bottom to allow the top and bottom beams to lock in place.  All these measurements made the acrylic panels slightly less than 3 1/2" by 12 1/4" each.  In the interest of not wasting materials, I built one window panel without glue to see if this would work the way I thought it should.  I took the protective film off of the test acrylic piece to get an accurate feel for the end result.  I had plenty of acrylic to cut fresh panels for the final window, so it wouldn't matter if this one was scratched during the planning and construction process.

The top and bottom beams lock on.  Trim wood would be used to fill in the track on the upper and lower beams later in the assembly.

It felt pretty solid with only two bits of tape on it, so I thought, "This just might work!"  :D

I sanded all of the wood pieces before building the window panels (all without glue), but I wanted to go further and paint as much as possible before adding the acrylic inserts.  I took the mockup acrylic panel to use as my spacer and glued the strip wood into the I-beams.

Once I had the vertical supports assembled, I tested the fit on the Studio.  So far, so good!

I cut the acrylic panels to use for the final window, leaving the protective film on.   I slipped them into the channels and checked the overall width of the window to see if the acrylic panels needed to be adjusted.

I marked the lengths for the upper and lower I-beams and cut them to fit.  I filled in the open outside channels of the I-beams using leftover Dura-Craft strip wood.  It's not a perfect fit, but I didn't want to go to the store for a few pieces of trim that wouldn't be noticeable in the end.

I then painted, sanded and painted these assemblies.   After painting, I glued the vertical assemblies into the bottom beam using the acrylic panels and a carpenter's square to ensure proper placement and alignment.

I cut pieces of the interior strip wood to fill in the bottom beam between the vertical supports on both sides.  I used the mockup acrylic for this part since I didn't want to get glue on the final pieces.

I cut pieces of strip wood to create the divide for the lower panes.

I then touched up the paint, removed the protective film from the acrylic, inserted the panes and pressed the top beam in place.  I didn't glue it because I was running short on time for the Undersized Urbanite contest and I might want to add a satin sealer later on.  I slipped in the strip wood interior trim without glue as well.  I placed the window in front of Studio and breathed a sigh of relief.  :D

The window sits in front of the opening without any attachment beyond some mini hold wax to keep it from shifting.  There's enough of an angle to the front of the building and weight to the window assembly that it will lean in place otherwise.

The window wall just lifts off to access the interior.

From the inside...

Hooray!!!!  :D

Undersized Urbanite: The Artist's Studio

by brae  

My entry in the Undersized Urbanite contest hosted by Christina at Little Victorian is The Artist's Studio. Voting link at the bottom of this post.

To see a list of posts showing details on how I made things or what materials I used, click this link.

I drew my concept inspiration from The Thomases' Rooftop Artist's Studio (seen in the second gallery in this link) and Nell Corkin's Summer Studio, created in tiny 1:144 scale.

The basic structure is the Loft kit from miniatures.com (this was their 2012 Creatin' Contest kit), though I made several modifications to it, including lowering the height by 5 3/8" and creating an angled front wall.


the first dry fit

After the large window, the most prominent feature on the exterior is The Deck, scratch built by me based on an original real life deck by Trex.  I left off the railing for my rendition since it's rather low to the ground and I didn't want to detract from the overall aesthetic.

I tried to capture the essence of the original while making it my own.


the original inspiration - image from Trex

A special thanks to my parents and the Proxxon scroll saw they gave me for Christmas!  I could not have accomplished this deck without it.

The lights on the steps are from Creative Reproductions 2 Scale.

It's not quite dark yet, so I'll have to take some nighttime photos another time.  :]

Woodrow's comfortable burrow is hidden under The Deck.  Woodrow was also made by *Reve*.

The landscaping is simple and serene, with a retaining wall built around the sides and back.

The scratch-built firewood box hides the switch for the wood stove inside.

The shutter garden was made following a similar life sized piece.

On the opposite side, there's an elegant fountain, but I think I need to do some more gardening on this side.  :D

I painted and upholstered a chaise for The Deck.  The magazine was made by me, and the mug is by Jane Graber.

The shingles are by What's Next and it was an adventure finding a supply for the Studio!  The chimney is made from a spare aquarium filter tube and a button.

The window wall lifts off to access the interior.  The window sits in front of the opening without any attachment beyond some mini hold wax to keep it from shifting.  There's enough of an angle to the front of the building and weight to the window assembly that it will lean in place otherwise.

The rustic wood floor in the main area was installed piece by piece, and the wood ceiling was created using Southern Pine flooring sheets.  The wallpapers are drawing papers: Daler-Rowney Dreadnought Grey for the main area and Canson Ivory for the bathroom.

There is a living area with a daybed from a Realife Miniatures kit, a whimsical cabinet by minisx2 and a scratch built wood stove.  I stitched the blue medallion rug and rewired some vintage Lundby lamps, one of which is from my childhood dollhouse.  The wall art is a cut section of Feathers scrapbook paper by Recollections, glued to a piece of black mat board.  The afghan is by Mary at Roslyn Treasures.

Cross-stitching time for the rug was 154.5 hours on 32 count Jobelan.  Final finishing took only a couple of hours.  The final measurements are 7 7/8" long by 4 5/8" wide.

The wood stove was made from mat board, wood, a plastic small scale window, resin fire, LEDs and jewelry findings.  The firewood is from an old tree cut down in its prime.  The brick surround is egg carton material.

Cora was made by *Reve* and her bed is a basket by Al Chandronnait from miniatures.com, though I added my own tufted insert.

The cardboard deer is from Amazing Miniatures.  I made the sunflower lamp, plants and book.

The forward area on the left side is the art space.

I wish I had such a lovely setup in real life!

There are rustic crate shelves stuffed with books, goodies and objets d'art perfect for creating interesting still life compositions.  Some of these items were purchased, some were gifts and some were created by me.  It would be too long of a list to name them all here.  :]

The artist paper pads were made by me.

There is an easel made using a pattern from Miniature Room Settings by Helen Ruthberg; I made it from basswood and stained it Minwax Cherry.  The stool was purchased from All Small Miniatures.  Lyssa sent me some art papers and wrapped canvases for a swap sometime ago.  I glued one of the papers to mat board and primed it with white paint.

Right now, mine is an ode to all well loved easels when they were first brought home.  :]

The book also had a pattern for a tabouret, which Dictionary.com defines as, "a small, usually portable stand, cabinet, or chest of drawers, as for holding work supplies."  In the interest of time, instead of making my tabouret from the pattern, I shortened a Daisy House floor shelf kit.  It is painted Sunflower by Folk Art.  Lyssa sent me the bead jars, and I finished with labels left over from the paint tube tutorial.

The tiny paint tubes were made from a tutorial by Carol of true2scale.

The lamp from The Dolls House Emporium is wired with one of my signature faux outlets.  :]  The sunflower lamp is also wired this way, but the cabinet hides the outlet.

And, of course, you can't have a cord stretched about waiting to trip you.  I made a cord cover from half round trim with a channel cut to cover the cord.  It is held in place with mini hold wax.

The bathroom occupies the right back corner and has a removable front wall.  The lighting, shower base and toilet are from The Dolls House Emporium.  The tile floor is Greenleaf vinyl tile.  The radiator was made from a Chrysnbon kit.

 The wall sink and soap holder (it has a magnet to hold the soap on) are from Bibian's Poppenhuis, and the mirror is a vintage Lundby piece from Vintage Lundby with a replacement insert made from Darice plastic mirror sheet.

The kitty tea towel is from Marlene.

I made a wood shelf for accessories and toiletries to sit below the octagon window.  I made the pet hair roller and loofah.  The bottle came from Fran, the fox is by Barbara Meyer and the vase was purchased from All Small Miniatures.  The GFCI outlet is a sticker from miniatures.com...love these!

I used a half scale shelving unit for some cleaning supplies, a lightbulb pack and some extra toilet paper.  In real life, you'd want to hide all these necessities, but in mini we just delight in seeing them out in the open.  :D

The chrome hardware was purchased, and I made the terry towel and bath mats.  There is real tissue around the toliet paper holder, and I made the tissue box as well.  It rather matches the shower, doesn't it?  The small metal waste bin is the largest from a set of kitchen canisters.

The hummingbird shower was made from scratch using original artwork drawn by me.

I photographed the artwork, added the grout lines in PhotoShop and made the tile texture with gloss glaze scored with a stylus.  The shower head and water control lever are from ELF Miniatures.

I used a simple washer to serve as an escutcheon for the water control lever.  I added lines of red and blue paint to indicate the hot-cold adjustment.  :D  I glued a Chrysnbon soap dish to the shower wall.  The blue soap and drain cover are also from ELF Miniatures.

Here is my drawing.

And a detail shot.

The baseboard for the bathroom is cut in pieces for inserting the removable wall, which also has a set of baseboard trim pieces.

The wall plaque is from Fran at FranMadeMinis.  I was having a fit trying to find just the right thing for this space, and Fran came through as always!  Fran also made the vintage overnight bag - more on that later.  :D  I made the muslin apron using a pattern from About.com.  It has tiny laser cut wood buttons from Dragonfly International.

In front of the bathroom is the kitchenette.  I envision this building to be an extra space built on a larger lot with a residence...like an efficiency apartment.  So, it wasn't built with the idea of its being a studio, per se, but a small retreat or guest cottage.  Now, it is occupied by an artist, and the cozy warmth inside inspires creativity even if it's not designed to be the most efficient artist studio with the best possible lighting and tons of storage.  To that end, I was very limited with what I could do in the way of fine dining.  :D

The Miele half fridge is from ELF Miniatures, and I recently purchased mini food items to go in and around it.  It's mostly snack foods and refreshments.  There's some wine in there!  :D

Cora has spotted something.

I made two modern block shelves for groceries and dishes to sit on above the fridge.

In order to heat up the soup and make instant oatmeal, I fashioned a hot plate to sit atop the fridge.

And, yes, it has a UL label in the back.  :D

I hope you've enjoyed the tour through The Artist's Studio!  I have a few accessories I didn't have time to complete before the deadline, so this is not the last you'll see of it.  :D

It got dark while I was writing this post!  :O

Voting in the Undersized Urbanite contest starts May 5, 2013 at 8:00 PM (EST) and closes on May 12, 2013 at 8:00 PM (EST).  Results found here.

Time for a midnight snack...

The Artist's Studio - sneak peek 2

by brae  

I'm editing the last of the pictures....full post coming shortly!  :D

The Artist's Studio - sneak peek

by brae  

Yes, I am up much too late finishing up some things on the Studio.  :D  This easel was made using a pattern from Miniature Room Settings by Helen Ruthberg; I made it from basswood and stained it Minwax Cherry.  The stool was purchased from All Small MiniaturesLyssa sent me some art papers and wrapped canvases for a swap sometime ago.  I glued one of the papers to mat board and primed it with white paint.

I'll be up "early" tomorrow to photograph and post by late afternoon!  :O

Window into the future...

by brae  

I'm currently working on the big front window...the last major structural element for The Artist's Studio.

Since the Undersized Urbanite contest deadline is in a matter of days, I'll leave this as the last post on the Studio before the final reveal.  :D

1 2 4 5 ...6 ...7 8 9 10 11 12 ... 17